Electrical Rewiring Everett, WA
Whole-Home Rewiring
Everett has a lot of beautiful old houses. A fair number of them are still running on wiring that predates color TV.
Pre-war ungrounded runs, early aluminum, cloth-insulated wire that crumbles when you look at it — it worked fine for decades, but it wasn't built for a modern electrical life, and insurers know it. Plenty of carriers around here won't write a policy on a home still running its original ungrounded system, or they'll charge a premium for the privilege. That alone sends a lot of our rewire calls our way. We replace the old stuff with modern, grounded, code-compliant wiring — and we do it with as little drama to your walls as the structure allows.
Signs an Everett home is due for rewiring
Some tells are visual: two-prong outlets everywhere, a fuse box instead of breakers, cloth-covered runs in the attic, or the ceramic posts of the very oldest systems. Others you feel — lights that dim when the furnace kicks on, outlets that only work when the plug sits at a certain angle, breakers that trip on ordinary evenings. And some arrive by mail: an insurer asking pointed questions about aluminum wiring electrical underwriters have learned to distrust, or declining renewal outright.
Much of the older Everett wiring we open up has been “helped” over the decades — a junction buried behind drywall here, a splice by a previous owner there. That patchwork is exactly what our electrical rewiring services are built to untangle, and what a licensed electrician looks for during the walkthrough, and it’s why we quote from an actual walkthrough of the property, not a square-footage chart.
What a rewire involves (and what it costs)
Straight talk: rewiring is real work, and the price reflects it. Around Everett, smaller or partial jobs can start near $4,000, while a full rewire on a larger or harder-to-access home can climb toward $20,000+. Statewide, full rewires often land in the $12,000–$20,000 range. Age, size, finishes, and how easy it is to fish new wire all move the number — and unlike electrical contractors who quote from a chart, we price the installation from what the walls actually hold.
We work in fish-and-snake fashion wherever we can — pulling new wire through existing walls instead of opening everything up. Some patching is usually unavoidable, but we keep it minimal and tell you upfront where it'll happen. It's permitted, inspected, and staged so you're not without power any longer than necessary.
Why this isn't a DIY or a handyman job
Hidden wiring, old materials, and fire risk — three reasons you want a licensed electrician who'll pull the permit and put it in front of an inspector. A rewire that isn't documented can haunt you at resale, too. We've seen deals stall over an un-permitted "we did it ourselves" job in the attic.
How a whole-home rewiring installation is staged
Day one of any rewiring installation around Everett is mapping: every circuit traced and labeled, the electrical panel assessed, and the plan agreed room by room. Then the crew works in stages so the place stays livable — bedrooms one day, kitchen the next — pulling new copper through existing cavities, setting grounded outlets and AFCI protection, and correcting the improvised wiring installation and splice choices previous decades left behind. Lighting circuits usually get rethought at the same time; if you’ve been wanting recessed fixtures or a proper lighting installation in the kitchen, mid-rewire is the cheapest installation window it will ever get in Everett. The same goes for a panel upgrade or an electrical repair you’ve been postponing — the walls are already open, so folding that work in costs a fraction of a separate visit.
Every stage ends with testing, and the whole electrical services package closes with the county sign-off — a pro putting the installation approval in writing. For commercial buildings the staging logic is the same, just scheduled around your open hours. Safety drives the sequence throughout: the electrical work is dead-tested before anything is energized, and nothing gets buried behind fresh paint until it has passed.
Why us
One licensed crew — not a chain of subs pointing at each other.
Every job runs under Washington State L&I electrical contractor registration, we pull the permit, we coordinate with Snohomish County PUD when the utility side needs touching, and we're the same folks you can call when it needs service down the road. One company for the pipes and the panel both.
(425) 374-1557Licensed & bonded
WA State L&I registered, every electrician certified.
Permit handled
We file and meet the inspector on every applicable job.
Plumbing + electrical
One company, one standard — fewer numbers in your phone.
Written price up front
You see the number before we start. No surprise line items.
Quick answers
Questions homeowners ask us
How much does it cost to rewire a house in Everett?
Can you rewire without tearing out all the drywall?
Is knob-and-tube wiring dangerous?
How long does a whole-home rewire take?
Can you rewire just part of a home?
Will a rewire help with my insurance?
Bring the wiring into this century.
Grounded, safe, permitted, and insurance-friendly — without wrecking the place to get there.
Licensed · Bonded · Insured · WA L&I Registered · All electrical services