Generator Installation Everett, WA
Generator Installation
Around here, the power doesn't ask before it leaves. One good November windstorm off the Sound and half the region is digging out the candles.
A standby generator skips all that. It sits quietly beside the house, watches the grid, and kicks on within seconds of an outage — heat, fridge, well pump, wifi, all of it, no extension cords snaking through a cracked-open door. PSE customers in this corner of Washington lose power more than the national average most winters, so it's less "if" than "how long this time." We size it, install it, wire the transfer switch, and handle the permit. You get back to ignoring the weather.
Standby generator vs. portable — the honest version
Both have a place, and we'll tell you which fits.
A standby unit is the set-and-forget option — permanently installed, runs on natural gas or propane, starts itself, powers the whole house (or the circuits that matter most). A portable generator is cheaper up front but you're hauling it out, fueling it, and it only covers what you can safely run through a proper inlet — never a stretch cord into a wall, please. We've seen the backfeed damage that causes. It's ugly.
Rough numbers: a portable hookup with an inlet and interlock often runs $800–$2,000, while a whole-home standby system installed typically lands $5,000–$12,000+ depending on size and gas work.
What generator installation actually involves
Here's the sequence:
- Sizing — a load calc so the unit matches what you actually need to run, not a guess
- Placement & pad — code-compliant clearances, set on a stable base
- Transfer switch — automatic for standby, or a manual transfer switch / interlock for portable, so the generator can never backfeed the grid (that's the part that protects line workers and your gear)
- Gas or fuel hookup coordinated with the unit
- Permit and inspection through Everett or Snohomish County — we file and meet the inspector
That transfer switch isn't optional or a nice-to-have. It's the whole safety story. Done wrong, a generator can push power back onto the utility line and hurt someone. Done right, you never think about it.
Why a licensed electrician (and not the big-box install)
A generator ties into your panel, your gas, and the utility — three things you want one accountable, licensed crew handling end to end, not a chain of subcontractors pointing at each other. We're Washington L&I registered, we pull the permit, and we're the same folks you can call when it needs service down the road.
Why us
One licensed crew — not a chain of subs pointing at each other.
Every job runs under Washington State L&I electrical contractor registration, we pull the permit, we coordinate with the local PUD when the utility side needs touching, and we're the same folks you can call when it needs service down the road. One company for the pipes and the panel both.
(425) 374-1557Licensed & bonded
WA State L&I registered, every electrician certified.
Permit handled
We file and meet the inspector on every applicable job.
Plumbing + electrical
One company, one standard — fewer numbers in your phone.
Written price up front
You see the number before we start. No surprise line items.
Your Everett generator team — Generac, Kohler, generator maintenance and repairs
Most of the Everett generators we install come from the two big-name makers — both proven backup power platforms with parts we can actually get, which matters more than the brochure suggests. Want a unit sized for essentials only? A house generator that carries everything including the heat pump? Our experienced professionals will guide you through the choice without upselling capacity you’ll never use, and we’ll walk the entire process from load calculation to the first test run. As the licensed contractor on the electrical side from day one, we also wire monitoring so the electrical systems tell you about a failed exercise cycle before the storm does.
After installation generator owners get the boring-but-vital stuff from the same crew: annual generator maintenance, oil and battery checks as part of scheduled maintenance services, and generator repair or warranty repairs when a unit misbehaves. For an Everett Generac or Kohler generator owner, that means one number to call for the life of the backup system — commercial buildings included.
Quick answers
Questions homeowners ask us
How much does a whole-home generator cost in Everett?
What size generator do I need?
Do I need a permit for a generator in Everett?
Can you connect a generator I already purchased?
Beat the next outage with backup power.
Sized right, wired safe, permitted — so the next windstorm is someone else's problem.
Licensed · Bonded · Insured · WA L&I Registered · All electrical services